The adjustable frame clamps on the Hollywood Racks Destination Bike Rack # HLY94FR allows for you to carry women's bikes or hybrid framed bikes without needing an adapter. The Frame clamp can be lowered to the clamp to the frame on both bikes. I have included an image showing both bike types loaded on this rack for you to see. view full answer...
While your 2021 Ford Bronco Sport has a 2" hitch receiver, it is Class II. This is unusual. Class II hitch receivers are usually 1-1/4". If you have a ball mount, like the Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs, part # C45155, you should not have to hit a hammer to get the ball mount to fit your hitch receiver. If you feel that the welds are a product defect, you can file them down to help your ball mount get installed smoothly. In addition, sometimes... view full answer...
For installing the Prodigy P3 part # 90195 in your 2021 Ford Bronco Sport with a 4-way the kit you need is the # ETBC7 which will adapt your 4-way to a both a 7-way and a 4-way and comes with everything needed to install the brake controller too. This does require hardwiring though as your vehicle does not come with brake controller pre-wiring. view full answer...
While we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle.
From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your... view full answer...
The Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 is designed to fit a Draw-Tite hitch receiver. While it is possible, we cannot guarantee it will fit your factory hitch. Even if the hitch looks the same/similar all it takes is a slightly heavier powder coat or collar design for it to not work. Instead, I recommend using an anti-rattle lock like the # 63232 or standard anti-rattle like the # RM-061 view full answer...
The absolute best trailer hitch for your 2024 Ford Bronco Sport is the etrailer Trailer Hitch Receiver # e57KR because of the matte black finish. This not only looks better, but is also more durable than the classic glossy black finish that we see on the other options available. I've actually had a few of our etrailer hitches installed on my personal vehicles and I've never been disappointed with them!
Then for wiring I really like the Curt T-Connector # C47WR because it tees in behind... view full answer...
The hitch manufacturers who offer the trailer wiring harnesses haven't yet determined fits for a trailer wiring harness at this time. My contact at Curt tells me that although a custom, plug and play option isn't available, their universal harness, part # C59236 would work for your truck.
I've linked to a video showing a typical installation. view full answer...
Yes, there is a set of crossbars that will fit the factory side rails of your 2023 Ford Bronco Sport. This mounts directly to the side rails and has plenty of capacity for a cargo box. You will want the roof rack by Rhino Rack and it includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100
This aero bar roof rack system has... view full answer...
Yes, you will be able to install the Rhino-Rack SX Series Legs # RRSX100 and 49" Vortex Aero Crossbars # RRVA126B-2 on the raised rails of your 2021 Ford Bronco Sport.
The crossbars have plastic locks but they can be upgraded to metal by using part # RRVA-LEC4.
Attached is an installation video of this exact setup for you to check out! view full answer...
Yes, we have a hitch confirmed to fit your 2022 Ford Bronco Sport. The Curt Trailer Hitch Receiver # C76HR is confirmed to fit your 2022 Ford Bronco Sport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you are going to tow with your Bronco Sport you can round out a towing package by picking up the T-One... view full answer...
The Curt Roof Mounted Cargo Basket # C18115-117 mounting bracket spacing does not match up with the OEM crossbar locations for your 2021 Ford Bronco Sport so we'll need to go with a different cargo carrier, and for that I recommend the following from Rhino-Rack:
- Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB02
This is a little smaller than the one you're looking at but the mounting brackets slide along the bottom of the cargo carrier and is compatible with 25-1/2" - 43" crossbar... view full answer...
Since the Kuat Transfer V2 Bike Rack # KU64FR can handle up to a 60 lb bike with a max wheelbase of 50" and since your Santa Cruz falls within these specs (even though the wheelbase is at max) it will be a great option for you!
The Transfer V2 comes with a cable lock but if you want to lock the rack to your hitch receiver you'll also need the locking hitch pin part # HL1.
Attached is a review video of this rack for you to check out. view full answer...
There is a fit for a roof rack for your 2021 Ford Bronco Sport, so long as it has raised side rails. The rack that fits is from Yakima, and consists of just a couple parts:
- Yakima JetStream Crossbars - # Y00426
- TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR
This rack will give your '21 Bronco Sport a roof rack with 60 inch long crossbars which are also super quiet, easy to use, and have a 165 lb weight capacity. The JetStream crossbars are aerodynamically... view full answer...
We do have a trailer hitch receiver that is a fit for the 2021 Ford Bronco Sport, and I verified with the manufacturer that the correct fit is the following:
- Curt Trailer Hitch Receiver # C76HR
The hitch is a complete bolt-on installation as well, so no drilling into your Bronco Sport's frame is needed. I have added a link below to the installation instructions for you to take a look at so you can see how simple the installation process really is.
The only other thing I wanted to mention... view full answer...
We do have a trailer wiring harness that fits your 2021 Ford Bronco Sport, which is the following part:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR
This harness is manufactured by Tekonsha, who is known to make the most reliable trailer wiring harnesses in the industry, so it's going to provide you with the best way to power your trailer's lights. It does store in your Bronco Sport's rear cargo area when you aren't using it, so you don't need a mounting... view full answer...
Yes, the Rhino-Rack Pioneer Platform Rack # RR77AB includes the legs to fit the raised rails on your 2023 Ford Bronco Sport. This rack is 60" long and 49" wide and weighs 54lbs. view full answer...
For your 2022 Ford Bronco Sport, the etrailer Trailer Hitch Receiver # e57KR is a confirmed fit. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a nice matte black finish.
If you plan to do any towing, you can round out a tow package by adding the T-One Vehicle Wiring Harness # TK46FR... view full answer...
There is indeed a trailer hitch receiver that fits your 2024 Ford Bronco Sport, from Curt, at the following part number:
- Curt Trailer Hitch Receiver # C76HR
I verified this fit directly with the manufacturer for you. view full answer...
The power wire ran to the battery with the T-One Vehicle Wiring Harness # TK46FR is what powers the module and sends power to the trailer. This module combines the separate turn signal/brake lights into the single wire used on trailer as well as reduces power strain put on the factory wiring. Since vehicle wiring has gotten thinner to save on costs you cannot pull enough power from the factory wiring so the powered converter provides the power sent to the lights on the trailer.
If you... view full answer...
Go To Results